Divine Gelz

HEAVENLY GELZ INSTRUCTIONS 





1. Push back the 
cuticle and clean the surrounding nail plate.

2. Use a file to shape the nature nail and to etch the nail.

3. Remove all dust with ClenZ'R, let dry, then apply

Bond'R pH to the nail. Optional: Prime the nail with Bond'R,

this is recommended for problem lifters. Allow to air dry for

10 to 15 seconds. Bond'R can be applied to the entire nail or

only the problem areas.

4. Apply a thin layer of Heavenly Blush from the cuticle to free edge. Use an orangewood stick to remove gelz around the cuticle. Make sure to cap over the edges.

5. Place hand in an LED lamp for 60 seconds or 2 minutes in an UV light (4X9 watt).

6. Apply a second thin coat of Heavenly Blush making sure to cap around the edges.

7. Place hand in an LED lamp for 60 seconds or 2 minutes in an UV light (4X9 watt).

8. Apply the first coat of your Heavenly Gelz color, it is better to apply in several THIN coats. Make sure to cover the edges.

9. Place hand in an LED lamp for 60 seconds or 2 minutes in an UV light (4X9 watt).

10. Apply a second coat of your Heavenly Gelz color paying close attention to covering all the edges.

11. Place hand in an LED lamp for 60 seconds or 2 minutes in an UV light (4X9 watt).

12. If needed apply a third coat of your Heavenly Gelz color and place hand in an LED lamp for 60 seconds or 2 minutes in an UV light (4X9) watt.

13. Apply a coat of Heavenly Blush or Heavenly Candy depending on the look you are for over all of the nail.

14. Place hand in an LED lamp for 60 seconds or 2 minutes in an UV light (4X9 watt).

15. Apply second coat of Heavenly Blush or Heavenly Candy depending on the look you are for over all of the nail making sure to cover the edges.

16. Place hand in an LED lamp for 60 seconds or 2 minutes in an UV light (4X9 watt).

17. Wipe of the "Tacky" surface with Clenz'R,